from 800 m³/h to 4 000 m³/h
Saves usefull space of expensive commercial real estate, as it is attached to the ceiling.
Easy to install even over a suspended ceiling, due to a minimum size of 338 mm.
Mounting of SKYSTAR is much easier than duct ventilation.
High noise and heat insulation of the unit (panel thickness 30 mm (up/down) and 50 mm (side)).
The automation system provides full control over regulation and protection of the entire ventilation system.
It is possible to equip the unit with an electric or water heat exchanger.
High-quality aluminium recuperator reduces overall energy consumption up to 60%.
2-6-row water heaters are used.
Maximum working pressure: 20 atm.
Copper pipes: diameter - 9.52 mm, wall thickness - 0.27 mm / 0.33 mm.
Cassette or pocket filter is used as needed. Filters are used to clean the supply air.
Evaporators during production process are filled with nitrogen.
Production with the right or left connection of refrigerant is possible. Equipped with a dropseparator with an insulated tray for condensate drainage.
Provides minimal pressure loss and equalizes airflow. Air fairings are installed in front of the noise-absorbing plates, the air flow in the cross section of the channel is equalized.
It consists of rotating slats with optimal aerodynamic characteristics. A rubber seal is provided between the flaps and the valve body, which prevents air suction and freezing of the plates. Smooth regulation of an air stream is provided by the metal force distributor.